A Beginner's Guide to DJI Mic Mini 2

01 Unboxing

Open the box and take out the product and accessories in order. Check that all items correspond to the checklist and that their appearance is intact. Please refer to the image below for details.

02 Preparing Your Device

2.1 Device Compatibility

Before you start, check that your phone or tablet model is compatible with DJI Mic Mini 2.

If you plan to use a camera, check that your camera model is compatible too.

2.2 Device Charging

· Place the transmitter and the receiver in the charging case to charge both devices simultaneously.

· If your charging case is low on battery, use the included USB-C cable to charge it.

· The transmitter can be charged separately using the magnetic charging cable.

· The receiver can be charged separately using a USB-C cable.

2.3 Power On/Off

· Press and hold the power button on the side of the transmitter or receiver for 2 seconds to power it on or off.

2.4 Linking the Transmitter and the Receiver

The transmitter and the receiver in the combos are linked by default. If the transmitter and receiver are disconnected, use either of the following methods to link them again:

· Place the transmitter and receiver in the charging case, and they will link automatically.

· Press and hold the Linking button on the transmitter for 2 seconds until the system status LED blinks blue and green alternately. Then press and hold the Linking button on the receiver for 2 seconds until the transmitter status LED on the front of the receiver blinks green quickly, indicating that the device is in linking status. The status LEDs will turn solid green after successful linking.

2.5 Connecting to the App

After connecting to the DJI Mimo app, you can update the firmware or adjust parameters via DJI Mimo, so download the DJI Mimo app to your phone before you start.

DJI Mic Mini 2 supports connection via the mobile phone adapter or Bluetooth.

· Via the Mobile Phone Adapter

· Via Bluetooth

2.6 Adjusting Parameters and Updating Firmware

· Adjusting Parameters

In the device settings page in the DJI Mimo app, you can view connected devices and their battery levels, and adjust settings.

· Updating Firmware

Once connected to the app, if you’re prompted that a new firmware version is available, follow the on-screen instructions to update it for the best user experience.

03 Using the Product

3.1 Wearing the Transmitter

3.1.1 Attaching the Windscreen

When recording outdoors or in windy conditions, attach the windscreen to reduce wind noise and improve audio quality.

3.1.2 Replacing the Magnetic Front Cover

The front cover attaches magnetically and can be replaced for styling changes.

3.1.3 Ways to Wear the Transmitter

The transmitter can be attached to your clothing using either the clip or the magnet.

3.2 Using with a Phone, Camera, or Computer

3.2.1 Using with a Phone

You can connect DJI Mic Mini 2 to your phone using the adapter or via Bluetooth.

· Via the Mobile Phone Adapter (Take DJI Mic 3 as an example)

· Via Bluetooth (Take DJI Mic 3 as an example)

3.2.2 Using with a Camera

Connect DJI Mic Mini 2 to a camera using a camera audio cable.

3.2.3 Using with a Computer

Connect the receiver to your computer using the included charging cable or adapter, then set the audio input options on the computer. The transmitter can then be used as an external microphone.

3.3 Transmitter Directly Connected to Filming Devices

The transmitter can connect directly to a compatible DJI filming device via Bluetooth.

3.4 Using DJI Mic Series Mobile Receiver

Watch the video to learn how to install, link, and use the DJI Mic Series Mobile Receiver.